Facial Aesthetics

Cheek and Malar Implants in Istanbul

Cheek augmentation is not simply about making the cheeks larger.

  • Stay in Istanbul8 days
  • Surgery timePlanned individually
  • RecoveryMonitored with follow-ups
  • Pre-assessmentOnline, with photos

The appearance of the midface is determined by the relationship between:

  • Zygomatic projection
  • Malar width
  • Anterior cheek projection
  • Submalar contour
  • Orbital rim
  • Maxillary support
  • Facial fat compartments
  • Skin and soft tissues

When the underlying skeletal framework is deficient, adding soft-tissue volume alone may not reproduce the structure that is missing.

Cheek and malar implants can be used in selected patients to modify the skeletal foundation of the midface.

Depending on the anatomy, augmentation may involve a standard implant or a patient-specific custom-made implant designed to modify a particular three-dimensional deficiency.

The objective is not maximum cheek projection.

It is a cheek contour that remains proportional to the eyes, nose, jawline and the rest of the facial skeleton.

What Is a Cheek Implant?

A cheek implant is a facial implant designed to modify the contour and projection of the midface.

Depending on its geometry and position, an implant can influence:

  • Malar projection
  • Cheekbone width
  • Anterior cheek projection
  • Lateral cheek contour
  • Submalar transition
  • Facial symmetry

The term “cheek implant,” however, includes implants with very different shapes and purposes.

For this reason, implant selection should begin with the anatomical deficiency, not simply with implant size.

What Is the Malar Region?

The malar region is centered around the prominence of the zygomatic or cheekbone area.

It contributes significantly to:

  • Midface width
  • Facial highlights
  • Cheek projection
  • Eye–cheek relationship
  • Facial balance

Malar projection should therefore be evaluated in both frontal and profile views.

Malar vs Submalar Augmentation

These concepts should not be used interchangeably.

Malar Augmentation

Malar augmentation primarily increases projection around the cheekbone.

It may alter:

  • Lateral projection
  • Anterior-lateral projection
  • Midface width

depending on implant design.

Submalar Augmentation

Submalar augmentation affects the region below the principal malar prominence.

It creates a different three-dimensional effect and should not simply be considered a larger cheek implant.

Combined Malar–Submalar Augmentation

Some anatomical deficiencies extend across both regions.

In selected patients, implant geometry can be designed to create a continuous transition rather than an isolated focal prominence.

Skeletal Deficiency vs Soft-Tissue Volume Loss

This is one of the most important distinctions in cheek augmentation.

A flat midface can result from:

Skeletal deficiencyorSoft-tissue volume deficiency

—and sometimes both.

These are not equivalent.

If the problem is primarily skeletal, repeatedly adding filler or fat may increase facial volume without recreating an appropriate bony framework.

Conversely, if the skeleton is adequate and the principal problem is soft-tissue volume loss, an implant may not be the appropriate solution.

Cheek Implants vs Facial Fat Transfer

These procedures work at different anatomical levels.

Cheek implant → modifies skeletal projection

Facial fat transfer → restores selected soft-tissue volume

An implant provides structural augmentation from the underlying framework.

Fat transfer changes the soft-tissue envelope.

In selected patients both may have independent indications, but one should not automatically be used as a substitute for the other.

Cheek Implants vs Fillers

Dermal fillers can modify cheek contour without surgery.

They may be appropriate when:

  • The desired change is limited
  • The deficiency is predominantly soft tissue
  • Temporary or adjustable augmentation is preferred

Implants may be more relevant when there is a genuine skeletal deficiency requiring structural augmentation.

Increasing filler volume indefinitely does not necessarily reproduce skeletal projection and may create excessive soft-tissue fullness.

What Makes a Cheek Look “Flat”?

A flat cheek appearance can have several causes:

  • Limited zygomatic projection
  • Limited anterior maxillary support
  • Facial skeletal proportions
  • Soft-tissue volume deficiency
  • Facial aging
  • Midface descent
  • Natural facial morphology

The cause should be identified before choosing augmentation.

Cheek Projection Is Three-Dimensional

Cheek augmentation cannot be planned from a profile photograph alone.

The surgeon must consider:

  • Anterior projection
  • Lateral projection
  • Vertical position
  • Width
  • Transition into the orbit
  • Transition into the submalar region
  • Relationship with the nose
  • Relationship with the lower face

A few millimeters of augmentation in different directions can create very different facial effects.

Standard vs Custom-Made Cheek Implants

Cheek implants can broadly be considered as:

Standard / Prefabricated Implants

These are manufactured in predefined shapes and sizes.

They can be appropriate when the patient's deficiency corresponds well to an available implant geometry.

Custom-Made / Patient-Specific Implants

Custom-made implants are designed around the patient's individual skeletal anatomy using three-dimensional imaging and digital planning.

They may be useful when:

  • The desired geometry is highly specific
  • Significant asymmetry exists
  • Standard implants do not match the skeletal surface adequately
  • Multiple midface regions require coordinated augmentation
  • Previous surgery or trauma has altered the anatomy

Importantly:

“Custom-made” describes how the implant is designed. It does not describe the implant material.

What Is a PEEK Cheek Implant?

PEEK — polyether ether ketone — is an implant material.

It can be used in patient-specific craniofacial implant applications.

A custom-made cheek implant can therefore be made from PEEK.

But:

PEEK ≠ custom-made

and

custom-made ≠ PEEK.

One refers to material; the other refers to design.

Why Can PEEK Be Useful in Custom Facial Implant Planning?

PEEK can be manufactured into complex patient-specific geometries.

This can be useful when augmentation needs to follow an individualized skeletal surface.

The potential value is not simply the name of the material.

The important elements include:

  • Correct indication
  • Implant geometry
  • Skeletal fit
  • Position
  • Symmetry
  • Soft-tissue response

No implant material is universally superior for every patient.

Are PEEK Implants Porous?

PEEK should not automatically be described as a porous implant.

Standard PEEK is a distinct biomaterial, and its surface characteristics depend on how a particular implant is manufactured or modified.

Therefore:

PEEK and porous implants are not synonymous categories.

Silicone Cheek Implants

Silicone has long been used for facial augmentation.

Prefabricated silicone implants are available in different shapes and sizes.

Potential advantages in appropriately selected patients include:

  • Established clinical use
  • Multiple standard geometries
  • Relative flexibility
  • Ability to remove or exchange the implant if necessary

However, silicone is not automatically the correct choice for every skeletal deficiency.

The geometry and fit remain critical.

What Are Porous Facial Implants?

“Porous implant” describes a structural characteristic rather than one single material.

Different porous biomaterials can have different:

  • Mechanical properties
  • Tissue interactions
  • Surface characteristics
  • Handling characteristics

For this reason, “porous” should not be treated as one universal implant type.

Is PEEK Better Than Silicone?

There is no universal answer.

The relevant questions are:

  • What skeletal deficiency is being corrected?
  • Is a standard shape sufficient?
  • Is a patient-specific design necessary?
  • How much projection is required?
  • Where is the implant located?
  • What is the soft-tissue coverage?
  • Is there significant asymmetry?
  • Has the patient undergone previous surgery?

Material selection should follow the surgical objective rather than brand or material popularity.

When Can a Custom-Made Cheek Implant Be Useful?

A patient-specific implant may be particularly useful when there is:

  • Complex cheek deficiency
  • Significant facial asymmetry
  • Different requirements on the right and left sides
  • Combined malar and adjacent skeletal deficiency
  • Previous facial trauma
  • Previous implant surgery
  • A need for precise control of implant geometry

The advantage of custom design is primarily the ability to plan shape, not simply volume.

3D Planning for Custom Cheek Implants

Patient-specific facial implants can be planned using three-dimensional skeletal imaging.

The process conceptually allows evaluation of:

  • Skeletal asymmetry
  • Existing cheek projection
  • Right–left differences
  • Implant footprint
  • Implant thickness
  • Transition zones
  • Relationship with adjacent facial bones

The objective is to design augmentation that integrates with the patient's existing facial skeleton.

Why Implant Shape Matters More Than Implant Volume

Two implants with similar overall volume can create completely different faces.

One may increase:

  • Lateral width

while another increases:

  • Anterior projection.

Another may alter:

  • Malar prominence
  • Submalar transition
  • Orbital relationship

Therefore, choosing a cheek implant simply as “small, medium or large” can be an oversimplification.

Geometry is often more important than volume alone.

Cheek Implants and Facial Width

Cheek augmentation can change apparent facial width.

This may be desirable in some patients and undesirable in others.

A patient seeking more anterior cheek projection may not want substantially increased lateral width.

Implant design must therefore distinguish:

projection from width.

Cheek Implants and the Lower Eyelid

The cheek and lower eyelid form an anatomical continuum.

Skeletal projection beneath the eye contributes to the lid–cheek relationship.

However, cheek implantation should not automatically be presented as a treatment for:

  • Lower eyelid bags
  • Tear troughs
  • Lower eyelid laxity
  • Eyelid retraction

These problems require independent assessment.

Cheek Implants and the Infraorbital Rim

Some patients have skeletal deficiency extending beyond the malar prominence toward the infraorbital region.

This is different from isolated cheekbone deficiency.

When the skeletal problem spans several regions, patient-specific planning may provide greater control over the transition between them.

The treatment should remain based on the actual anatomical deficiency.

Cheek Implants and Facial Asymmetry

Facial asymmetry is common.

The important question is whether the asymmetry originates primarily from:

  • Skeleton
  • Soft tissue
  • Dental or jaw relationships
  • Previous trauma
  • Previous surgery
  • A combination

If skeletal asymmetry is a major component, custom-made implants can allow different right and left geometries.

Perfect symmetry, however, cannot be guaranteed.

Cheek Implants and Orthognathic Problems

Cheek implants alter contour.

They do not reposition the maxilla or correct dental occlusion.

When midface deficiency is part of a broader maxillofacial skeletal discrepancy involving:

  • Bite
  • Maxillary position
  • Mandibular relationship

orthognathic assessment may be required.

Facial implant surgery and orthognathic surgery solve different problems.

Cheek Implants in Facial Feminization Surgery

Cheek augmentation may be considered in selected Facial Feminization Surgery plans when midface skeletal projection contributes to the overall facial objective.

However, feminization should not simply mean “larger cheeks.”

The desired change depends on:

  • Facial width
  • Zygomatic projection
  • Chin and jawline
  • Forehead
  • Nose
  • Soft-tissue volume

The entire facial architecture should be considered.

Cheek Implants in Facial Masculinization Surgery

Selected patients undergoing Facial Masculinization Surgery may also benefit from midface skeletal augmentation.

Again, the objective is not simply increased size.

Projection, width and transition into the lower face should remain consistent with the intended facial proportions.

Cheek Implants and Rhinoplasty

The nose and midface are visually related.

A relatively prominent nose can appear different when surrounding skeletal projection changes.

Likewise, changing the nose can alter the perceived prominence of the cheeks.

When both regions have genuine indications for treatment, they should be planned in relation to each other rather than as isolated structures.

Cheek Implants and Chin/Jawline Implants

The upper and lower facial skeleton should remain proportional.

In selected patients, the skeletal deficiency may involve more than one region.

Potential combinations can include:

  • Cheek augmentation
  • Chin augmentation
  • Mandibular body augmentation
  • Mandibular angle augmentation

However, treating several regions does not mean making each region maximally prominent.

The objective is a coherent three-dimensional facial skeleton.

Can Cheek Implants Replace a Facelift?

No.

Implants change skeletal projection.

Facelift surgery repositions descended soft tissues.

A patient with age-related cheek descent does not automatically need an implant, and an implant should not be used simply to fill tissue that has descended.

The distinction between projection, volume and position is fundamental.

Can Cheek Implants Make the Face Look Younger?

Improved skeletal support can alter facial proportions, but cheek implants should not be marketed as a universal anti-aging procedure.

Aging involves:

  • Tissue descent
  • Volume changes
  • Skin changes
  • Skeletal changes

An implant addresses only selected structural deficiencies.

Can Cheek Implants Look Unnatural?

Yes, particularly if the implant is:

  • Too large
  • Too lateral
  • Too anterior
  • Poorly matched to the skeleton
  • Inappropriately positioned
  • Used when the actual problem is soft-tissue rather than skeletal

The most successful augmentation is often the one that integrates into the existing facial architecture rather than appearing as a separate cheek prominence.

How Are Cheek Implants Positioned?

Surgical access and fixation strategy depend on:

  • Implant type
  • Implant geometry
  • Anatomical region
  • Previous surgery
  • Surgeon planning

The objective is stable and anatomically appropriate positioning.

The exact operative plan should therefore be individualized rather than described as one universal technique.

Recovery After Cheek Implant Surgery

Early recovery can include:

  • Swelling
  • Bruising
  • Tightness
  • Temporary numbness
  • Temporary asymmetry
  • Soft-tissue stiffness

Because the midface can swell significantly, early cheek projection may appear greater than the final result.

When Is the Final Result Visible?

As swelling decreases, the relationship between the implant and surrounding soft tissues becomes more apparent.

Internal healing and soft-tissue adaptation continue beyond the early postoperative period.

The final result should therefore not be judged immediately after surgery.

Are Cheek Implants Permanent?

Facial implants are intended to provide long-term structural augmentation.

However, “permanent” should not be interpreted as meaning that an implant can never require:

  • Removal
  • Exchange
  • Repositioning
  • Revision

Future surgery can occasionally become necessary.

Risks of Cheek Implant Surgery

Potential risks include:

  • Bleeding
  • Hematoma
  • Infection
  • Swelling
  • Asymmetry
  • Implant malposition
  • Contour irregularity
  • Palpability or visibility
  • Sensory changes
  • Soft-tissue problems
  • Fixation-related problems
  • Unfavorable scar formation
  • Under- or overcorrection
  • Need for implant removal or exchange
  • Need for revision surgery

Risk depends on anatomy, implant design, material, surgical approach and previous procedures.

Dr. Fatih Ceran's Approach to Cheek and Malar Implants

For Dr. Fatih Ceran, the starting question is not:

“Which cheek implant should be used?”

The first question is:

“What is anatomically deficient?”

Planning evaluates:

Is the problem truly skeletal?

Is projection deficient anteriorly, laterally or in both directions?

Is the problem malar or submalar?

Does the infraorbital skeleton contribute?

Is there true facial asymmetry?

Would soft-tissue volume restoration be more appropriate?

Would a standard implant adequately match the deficiency?

Is patient-specific design justified?

How will cheek augmentation affect the apparent nose, chin and jawline?

And most importantly:

How much augmentation can be added without losing the patient's natural facial identity?

The implant is selected only after the anatomical objective has been defined.

Why Choose Dr. Fatih Ceran for Cheek Implants in Istanbul?

Cheek augmentation requires more than selecting an implant size.

The midface must be analyzed in three dimensions and in relation to the entire facial skeleton.

Dr. Fatih Ceran evaluates:

orbit → malar region → submalar region → nose → chin → jawline

as connected components of facial proportion.

Standard, custom-made and different implant material concepts are considered according to the anatomical requirement rather than assuming that one implant is universally superior.

Frequently Asked Questions About Cheek Implants

What is a cheek implant?

It is an implant used to modify the structural projection and contour of the midface.

What is the difference between malar and submalar implants?

Malar augmentation primarily modifies cheekbone prominence, while submalar augmentation affects the region beneath the main malar prominence.

Are cheek implants better than fillers?

Neither is universally better. Implants address skeletal projection, while fillers primarily modify soft-tissue volume and contour.

Are cheek implants better than fat transfer?

They solve different problems. Implants provide structural augmentation; fat transfer restores selected soft-tissue volume.

What is a custom-made cheek implant?

It is a patient-specific implant designed around the individual's skeletal anatomy rather than selected from a predefined standard shape.

Is a custom implant always PEEK?

No. “Custom-made” describes the design process; PEEK describes a material.

Is PEEK a porous implant?

Not automatically. PEEK and porous implants are not synonymous categories.

Is PEEK better than silicone?

No material is universally superior. Selection depends on anatomy, implant geometry, indication and surgical planning.

Can cheek implants correct facial asymmetry?

They may improve selected skeletal asymmetries, particularly with patient-specific designs, but perfect symmetry cannot be guaranteed.

Can cheek implants replace a facelift?

No. Implants change skeletal projection, while facelift surgery repositions descended soft tissues.

Can cheek and jaw implants be performed together?

They can be considered together when independent skeletal indications exist and the overall facial proportions support combined augmentation.

Can cheek implants be removed?

Implants can generally be removed or revised if necessary, although revision surgery has its own anatomical considerations and risks.

Ask about Cheek and Malar Implants

Leave your name and number and our team will contact you on WhatsApp. If you’d rather not wait, you can message us right away.

WhatsApp Consultation

or call: +90 552 313 02 96