Unlike standard implants, which are manufactured in predetermined shapes and sizes, a patient-specific implant can be designed around the patient's own skeletal surface and the precise contour change required.
PEEK — polyether ether ketone — is one of the biomaterials that can be used to manufacture these individualized implants.
Dr. Fatih Ceran uses a facial skeletal approach to evaluate patients requiring augmentation or correction of the chin, jawline, mandibular angles and selected other facial skeletal regions.
The objective is not simply to place a larger implant.
It is to identify the existing skeletal deficiency, digitally plan the desired three-dimensional contour and design an implant that corresponds to that individual anatomy.
What Is a Custom-Made Facial Implant?
A custom-made facial implant—also called a patient-specific implant (PSI)—is individually designed for one patient's facial skeleton.
The concept differs fundamentally from selecting a standard implant.
With a standard implant, the surgeon chooses from a predetermined range of shapes and sizes.
With a patient-specific implant, the process begins with the patient's own anatomy.
The skeletal deficiency is analyzed, the desired augmentation is designed digitally, and the implant is manufactured according to that plan.
Is PEEK the Same as a Custom-Made Implant?
No.
This distinction is important.
PEEK is a biomaterial.
Custom-made or patient-specific describes how the implant is designed.
A patient-specific implant can be manufactured from PEEK, but the terms are not interchangeable.
Therefore, the correct concept is:
Custom-made patient-specific PEEK facial implant.
What Is PEEK?
PEEK stands for polyether ether ketone.
It is a high-performance thermoplastic polymer used in a range of medical applications, including craniofacial reconstruction and patient-specific implants.
Its mechanical characteristics, ability to be manufactured with high geometric precision and compatibility with digital implant-design workflows make it particularly relevant to individualized craniofacial contouring.
PEEK should not, however, be presented as universally superior to every other facial implant material.
The appropriate material depends on the anatomical problem, implant design, surgical requirements and potential future revision considerations.
Is PEEK a Porous Implant?
Not necessarily.
Conventional PEEK is relatively bioinert and should not automatically be described as a porous tissue-ingrowth implant.
Porosity, surface modification and coatings represent separate material-design characteristics.
Therefore:
PEEK ≠ automatically porous
and
porous implant ≠ automatically PEEK.
This distinction is important when comparing PEEK with porous polyethylene and other facial implant materials.
Which Facial Areas Can Be Treated With Custom-Made Implants?
Depending on the anatomical indication, patient-specific facial implants may be designed for regions including:
- Chin
- Mandibular body
- Jawline
- Mandibular angles
- Malar or cheek region
- Selected midfacial skeletal deficiencies
- Selected craniofacial contour defects
- Facial asymmetry
- Post-traumatic skeletal contour deficiencies
- Selected reconstructive defects
- Revision of previous facial augmentation
The indication depends on the underlying skeletal anatomy.
Custom-Made Chin Implants
The chin is a three-dimensional structure.
Its appearance depends on:
- Projection
- Width
- Height
- Symmetry
- Transition into the mandibular body
A standard chin implant may be entirely appropriate for a straightforward deficiency.
However, when the patient requires asymmetric augmentation, unusual dimensions or a specific transition between the chin and jawline, a patient-specific implant can provide greater control over implant geometry.
Custom-Made Jawline Implants
The mandibular contour extends from the chin toward the mandibular angles.
Some patients do not have an isolated chin or angle deficiency; instead, the entire lateral mandibular contour may require augmentation.
A custom jawline implant can be designed to control:
- Mandibular body thickness
- Inferior border contour
- Lateral projection
- Chin-to-jaw transition
- Posterior extension
- Right-left differences
This allows the treatment plan to address the jaw as a continuous three-dimensional structure.
Custom-Made Mandibular Angle Implants
Mandibular angle augmentation can influence both the frontal and profile appearance of the lower face.
A patient-specific implant can be designed to modify:
- Bigonial width
- Lateral projection
- Posterior projection
- Vertical extension
- Angle morphology
- Relationship with the mandibular body
The amount and direction of augmentation do not need to be identical on the two sides when skeletal asymmetry is present.
Custom-Made Cheek and Malar Implants
Cheek contour depends on both soft tissues and the underlying zygomatic–malar skeleton.
In selected patients, inadequate skeletal projection rather than soft-tissue volume loss may be responsible for limited cheek definition.
A custom implant can potentially be designed according to the patient's individual malar anatomy when standard implant geometry does not adequately address the deficiency.
However, an important distinction must be made between skeletal deficiency and soft-tissue volume loss.
A patient who requires facial fat transfer does not automatically require a cheek implant, and a patient with true skeletal deficiency may not obtain the same structural correction from soft-tissue volumization alone.
Custom Facial Implants for Facial Asymmetry
Facial asymmetry is one of the situations in which patient-specific planning can be particularly valuable.
Human faces naturally have some degree of asymmetry.
However, more significant skeletal differences may arise from:
- Developmental anatomy
- Congenital differences
- Previous trauma
- Previous surgery
- Craniofacial conditions
- Differences in mandibular or midfacial growth
A pair of identical standard implants may not be appropriate when the two sides have different deficiencies.
Custom planning allows each side to be designed according to its own skeletal requirements.
Can the Right and Left Implants Be Different?
Yes.
This is one of the central advantages of patient-specific design.
If the right mandibular angle requires 4 mm of augmentation and the left side requires a different geometry, there is no requirement for the implants to be mirror-image copies.
The implants can be designed independently to improve overall skeletal balance.
The objective is not mathematically perfect symmetry.
It is to reduce clinically meaningful asymmetry while maintaining natural facial proportions.
Custom Facial Implants After Trauma
Facial trauma can produce complex contour abnormalities that do not correspond to the dimensions of standard aesthetic implants.
Even after appropriate fracture treatment, selected patients may have residual:
- Depression
- Asymmetry
- Skeletal contour irregularity
- Deficient projection
Patient-specific implants can be useful in selected secondary reconstructive cases because the implant can be designed according to the actual residual skeletal defect.
Custom Facial Implants in Revision Surgery
Revision facial implant surgery can be more complex than primary augmentation.
The patient may have:
- An incorrectly positioned previous implant
- Inadequate augmentation
- Excessive augmentation
- Residual asymmetry
- Bone or soft-tissue changes
- An implant whose geometry does not match the skeleton
After the previous implant and surrounding anatomy are evaluated, a patient-specific implant may be considered when a standard replacement would not adequately address the existing contour problem.
How Are Custom PEEK Facial Implants Designed?
The workflow can be understood in several stages.
1. Clinical Facial Analysis
Planning begins with the patient, not with the CT scan.
Facial proportions, asymmetry, soft tissues and the desired direction of change are assessed clinically.
2. Three-Dimensional Skeletal Imaging
High-resolution imaging can be used to create a digital representation of the facial skeleton.
The image data allow the underlying bone structure to be analyzed three-dimensionally.
3. Digital Reconstruction
The relevant skeletal structures are reconstructed in a virtual environment.
This allows the existing anatomy to be examined from frontal, lateral, oblique and inferior perspectives.
4. Virtual Implant Design
The required augmentation is designed over the patient's own skeleton.
Depending on the region, the surgeon can evaluate:
- Projection
- Width
- Height
- Thickness
- Extension
- Symmetry
- Transitions between adjacent skeletal regions
5. Review and Refinement
The proposed implant geometry is reviewed before manufacturing.
This stage is important because technically filling a skeletal depression does not necessarily create the desired aesthetic contour.
The implant must reflect the surgical aesthetic plan, not simply a computer-generated shape.
6. Patient-Specific Manufacturing
Once the final design has been approved, the implant is manufactured according to the planned geometry.
7. Surgical Placement
The implant is positioned on the intended skeletal surface according to the surgical plan and stabilized as required.
Why Does 3D Planning Matter?
A conventional two-dimensional photograph cannot fully demonstrate three-dimensional skeletal contour.
Digital skeletal analysis can be particularly useful for evaluating:
- Right-left differences
- Mandibular width
- Chin projection
- Mandibular-angle morphology
- Malar projection
- Complex contour deficiencies
- Relationship between adjacent skeletal regions
However, 3D planning is a tool, not the operation itself.
A technically precise implant can still be aesthetically inappropriate if the target contour is poorly chosen.
Therefore, the surgeon must define the aesthetic and anatomical objective before the implant is manufactured.
Standard Facial Implant vs Custom-Made Implant
Neither option should automatically be considered superior.
Standard Implants
Standard implants can be useful when:
- The skeletal deficiency is relatively straightforward
- A suitable implant shape already exists
- Right-left anatomy is reasonably symmetrical
- Extensive customization is unnecessary
Custom-Made Implants
Patient-specific implants become particularly valuable when:
- Significant asymmetry exists
- The required dimensions are unusual
- Several skeletal regions must be treated continuously
- Right and left sides require different augmentation
- Previous surgery has altered the anatomy
- The patient has a complex post-traumatic defect
- Standard implant geometry cannot reproduce the planned contour
The appropriate implant is the one that best addresses the anatomical problem.
PEEK vs Silicone Facial Implants
Silicone and PEEK differ in both material characteristics and how they are commonly used.
Standard silicone facial implants are available in multiple established shapes and dimensions and may be suitable for many straightforward augmentation procedures.
PEEK is particularly useful within computer-designed patient-specific implant workflows, allowing the geometry to be created around the patient's individual skeleton.
This does not mean that every patient requiring a facial implant should receive PEEK.
A standard implant may be the more appropriate solution for a simple deficiency.
Custom PEEK becomes particularly relevant when custom geometry itself provides clinical value.
PEEK vs Porous Facial Implants
Porous facial implants and conventional PEEK interact differently with surrounding tissues.
Porous materials can permit varying degrees of tissue ingrowth.
Conventional PEEK is comparatively bioinert.
This distinction affects tissue integration and can also influence the considerations involved in later revision or implant removal.
The choice should therefore take into account not only initial augmentation but also the long-term surgical context.
Custom Implant vs Facial Filler
Facial fillers primarily modify soft-tissue volume.
Custom implants modify contour at the level of the facial skeleton.
Small contour irregularities may sometimes be managed with injectable treatments.
However, repeatedly adding large amounts of soft-tissue filler is not anatomically equivalent to correcting a significant skeletal deficiency.
The correct treatment depends on whether the problem originates primarily from bone, soft tissue or both.
Custom Implant vs Facial Fat Transfer
Fat transfer can restore soft-tissue volume.
A custom implant provides structural augmentation over the facial skeleton.
These procedures can occasionally complement each other, but they are not interchangeable.
For example, a patient may have inadequate malar skeletal projection together with temporal soft-tissue volume loss.
Treating both areas with the same method simply because both appear “flat” would ignore their different anatomical causes.
Custom Facial Implants and Orthognathic Surgery
Patient-specific facial implants should not be used as a substitute for orthognathic surgery when the patient has a true dentofacial deformity involving occlusion and the relationship between the maxilla and mandible.
Orthognathic surgery repositions the facial skeleton and can alter the bite.
Facial implants primarily alter external skeletal contour.
In selected patients, implants may be considered as an adjunct to skeletal surgery for residual contour differences, but the two concepts should remain clearly separated.
Custom Facial Implants and Facial Masculinization
Custom implants can be useful in selected Facial Masculinization Surgery plans.
The chin, mandibular body and mandibular angles can be designed together to alter lower-face geometry.
Patient-specific planning can control:
- Chin width
- Chin projection
- Bigonial width
- Mandibular angle shape
- Jawline continuity
The goal is not simply to make every structure larger, but to modify facial skeletal proportions in the desired direction.
Custom Facial Implants and Facial Feminization
Patient-specific implants can also have selected applications in facial feminization when augmentation rather than reduction is required.
However, many facial feminization procedures involve skeletal reduction or repositioning, which cannot be replaced by an implant.
The treatment must therefore begin with the desired skeletal change rather than with a predetermined implant.
Can Custom Facial Implants Be Used With Closed Rhinoplasty?
Yes, when there are separate indications.
The relationship between the nose and chin is particularly important in profile analysis.
For example, a patient may have both a nasal deformity and deficient chin projection.
Treating the nose alone may not fully address the facial profile.
In selected patients, Closed Rhinoplasty and skeletal chin augmentation can therefore be considered within the same overall facial analysis.
Can Custom Implants Be Combined With Facial Lifting?
Yes, but the procedures treat different structures.
A custom facial implant changes skeletal contour.
A Deep Plane Facelift, Endoscopic Facelift or Neck Lift repositions soft tissues.
When skeletal deficiency and age-related soft-tissue descent coexist, both may need to be considered.
An implant should not be used simply to compensate for soft-tissue laxity.
Dr. Fatih Ceran's Approach to Custom-Made Facial Implants
For Dr. Fatih Ceran, custom implant surgery begins with a diagnosis of the facial skeletal problem rather than with selection of an implant material.
The face is evaluated in three dimensions.
The questions are:
Is the deficiency skeletal or soft-tissue based?
Which skeletal region is responsible?
Is the problem projection, width, height or asymmetry?
Are the right and left sides different?
Does the deficiency involve one region or extend continuously across the chin, mandibular body and angle?
Only after these questions are answered is the implant strategy determined.
Straightforward skeletal deficiencies may be treated with standard implants.
More complex anatomy may benefit from CT-based virtual planning and custom-made patient-specific PEEK implants.
The objective is not to demonstrate technology.
The objective is to use technology when it provides a more precise solution to the patient's anatomical problem.
Recovery After Custom Facial Implant Surgery
Recovery depends strongly on the anatomical region and extent of augmentation.
Swelling is expected and can temporarily exaggerate the apparent size of the augmented region.
Temporary tightness and sensory changes may occur.
As edema decreases, the overlying soft tissues gradually adapt to the new skeletal contour.
Larger or multi-region implants may require a different recovery period from isolated chin augmentation.
Risks of Custom Facial Implant Surgery
Potential risks include:
- Infection
- Bleeding and hematoma
- Implant malposition
- Implant displacement
- Asymmetry
- Contour irregularity
- Sensory changes
- Nerve-related symptoms
- Soft-tissue problems
- Implant exposure
- Chronic implant-related problems
- Bone changes
- Unsatisfactory aesthetic contour
- Need for implant removal
- Need for revision surgery
Custom design can improve geometric matching but does not eliminate the biological and surgical risks associated with facial implants.
Can a Custom PEEK Implant Be Removed?
Yes, patient-specific PEEK implants can be removed if clinically necessary.
However, revision surgery is influenced by implant location, fixation, surrounding scar tissue, previous operations and the individual anatomy.
No facial implant should therefore be presented to patients as something that can always be removed without consequence.
Are Custom PEEK Facial Implants Permanent?
They are designed for long-term implantation.
However, “permanent” should not be interpreted as a guarantee that an implant will never require revision or removal.
Infection, trauma, malposition, changes in aesthetic preference or other clinical circumstances can create a future indication for additional surgery.
Why Choose Dr. Fatih Ceran for Custom-Made PEEK Facial Implants in Istanbul?
Patient-specific facial implant surgery combines facial analysis, skeletal anatomy, digital planning and reconstructive principles.
Dr. Fatih Ceran evaluates the facial skeleton together with the overlying soft tissues before determining whether an implant is appropriate.
When standard implant geometry is insufficient, a custom-made PEEK implant can be designed according to the patient's own three-dimensional skeletal anatomy.
The chin, mandibular body, jawline, mandibular angles and selected other skeletal regions can be analyzed individually or as part of a continuous facial contour.
The goal is not simply to use a custom implant.
The goal is to create an implant only where required, in the dimensions required and according to the individual patient's facial skeleton.
Frequently Asked Questions About Custom PEEK Facial Implants
What is a custom-made facial implant?
It is an implant individually designed according to the patient's three-dimensional facial skeleton rather than selected from standard predetermined shapes.
What is PEEK?
PEEK is a high-performance polymer that can be used to manufacture patient-specific craniofacial and facial implants.
Is every PEEK implant custom-made?
No. PEEK describes the material, while custom-made describes the design process.
Is every custom facial implant made from PEEK?
No. Patient-specific implants can be manufactured from different biomaterials.
Is PEEK porous?
Conventional PEEK is not automatically a porous tissue-ingrowth implant. Porosity and surface modification are separate design characteristics.
Which facial areas can receive custom implants?
Common applications can include the chin, jawline, mandibular angles and malar region, as well as selected asymmetric, reconstructive or post-traumatic skeletal defects.
How is a custom PEEK implant designed?
Three-dimensional skeletal imaging is used to reconstruct the patient's anatomy digitally. The required augmentation is designed on this model before the implant is manufactured.
Can the right and left implants be different?
Yes. Patient-specific design allows each side to have a different geometry when the underlying skeletal anatomy is asymmetric.
Is custom-made always better than a standard implant?
No. A standard implant may be entirely appropriate for a straightforward deficiency. Custom design becomes valuable when the anatomy requires individualized geometry.
Can custom implants correct facial asymmetry?
Selected skeletal asymmetries can be improved by designing different augmentation for the two sides.
Can custom PEEK implants be used after previous implant surgery?
They may be considered in selected revision cases after the existing implant, bone and soft tissues have been evaluated.
Can a PEEK implant be removed later?
Yes, although revision or removal is still a surgical procedure and its complexity depends on implant position, fixation and previous surgery.